Our E-mail:
cj750net@gmail.com
MSN: cj750net@hotmail.com
Skype: cj750net
Facebook: CJ750

 



Index

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
FAQ's
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   

 

 

Genuine PLA Chang Jiang 750 Sidecars and PLA Parts:

Big Bill's Bikes has genuine original PLA issued Chang Jiang 750 sidecar and original PLA issued parts for you direct from the PLA warehouses. These PLA issued sidecars are highly promoted by many to be rare and special or in limited supply and are extremely hard to find so order yours today from us only. Check out our details and you will realize that there are many brokers offering newer bikes as PLA bikes. Email me for details.

We restore our Chang Jiang 750 sidecars from PLA issued surplus Chang Jiang 750 sidecars from the 1970's, 1980's and pay meticulous attention to all details. Look at our PLA list of items that go into a PLA restoration. Read our restoration details and find out all about Chang Jiang 750 sidecars and the PLA inventory. On the internet you can find many claims about PLA sidecars being better and importantly there is China produce about 1.3 million of them and there are many waiting for a new home.

What makes our genuine PLA sidecar authentic is that we use only original PLA parts from real NOS PLA inventory that has been sitting in storage for decades and we get it before it goes to the junk yard to become scrap metal. This stuff is still packed in 50 year old wax and will even have a paper with Chairman Mao's wisdom written on it (most items made in the 70's have it too). All of our PLA restorations are from unused PLA issued parts however some might have some slight usage but are in excellent condition. We get all our genuine PLA Chang Jiang 750 sidecars direct from the PLA and on some sunny days if you come to our shop you can actually see PLA guys also buying parts from our shop. That's right! The PLA buy their parts from us too. A picture is worth a thousand words.

Big Bill's Bikes have the best quality restoration and customizes PLA Chang Jiang 750 sidecars to your specifications. Our beautiful restored real authentic original genuine PLA issued Chang Jiang 750 sidecars have the following as standard rebuild except for the bearings, so make sure that your builder has the same standards:

  • All component in engine are new unused PLA issued parts, such as pistons, valves, etc.
  • All our frames are PLA issued and have grease nipples, if not we will put them in with a PLA issued drill bit.
  • 3 rings short skirts pistons with upgraded rings. (high performance pistons), not made on the road side by high tech peasants as also mentioned by another website and discussion board, but by a high tech factory with CNC machinery. A French citizen from Martinque nicknamed Mr. Chang Jiang can find ones made on the roadside. I wonder where he gets his parts from because he does not even have his own shop yet has conned people to promote him.
  • PLA issue distributor from the 60's, NOS, there are thousands of them, not many people use 6v engines so they are close to being useless in the local market but we have boxes of them.
  • PLA NOS rear fender and front fender.
  • Solid copper head gasket, we have PLA issue ones cut with an PLA AK47 Bayonet knife.
  • PLA issue valves, NOS from PLA inventory.
  • PLA issue gas cap.
  • New PLA issue engine main rear seal.
  • FAG or SKF bearings in engine, transmission and wheels. (one of the few non PLA parts on our authentic Chang Jiang 750 sidecar, you have to pay extra 100USD for this, otherwise we will put the original PLA issued bearings in)
  • PLA NOS gas tank with rubber knee pads.
  • Original PLA issue voltage regulator, brand new and also brand new generator.
  • PLA NOS sidecar fender. (It has a few extra holes drilled in it for external wiring).
  • Wooden duckboards in sidecar (non PLA, but wood was cut with PLA issued saw, and finished is applied by a retired PLA soldier).
  • Brand new PLA issue NOS cylinder's heads with brass jacket for the spark plug.
  • Vintage PLA style wires.
  • Brand new PLA sidecar bucket.
  • Vintage cloth PLA issue spark plug cables.
  • Brand new PLA issue fork inner tubes.
  • Original factory issue spring sidecar seat.
  • Stainless steel bolts and screws (non PLA)
  • PLA issue headlight lens.
  • PLA paint color available.

A special offer for PLA Chang Jiang 750 sidecars enthusiast, order your PLA CJ750 from us and you will also get a box of PLA issued parts, and to make it really special we will include, PLA issue wind glasses, PLA issue sneakers, PLA issue belt buckle and PLA issue t-shirt and PLA camo pants, and even a PLA tie clip for the special occassions. Just let us know you are a PLA enthusiast.

Now look at the amount of PLA wording that goes into one of our sidecar. Importantly our prices are the same for all this PLA Chang Jiang 750 sidecar. Now you can get an Incredible real genuine authentic deal with all the PLA attachments and adjectives at the same price. You can't get a better deal than this, all PLA with no Bullshit at a fair market price!

top»
faq index»
main»

 

 


Links:
Visit our friend's websites
click on the logos!





www.cj750.org
The Chang Jiang 750
community site. Forum,
pictures, dealers, blog,
ride calender. A must visit
for CJ750 owners. Find out what's happening, the latest rides, events, and post your pictures.


Beijing Sidecars
Some really cool pictures, check out Beijing Sidecars site. China's oldest and largest sidecar motorcycle club!


Shanghai Sidecars
Our partners in Shanghai
check out this cool site!



Sidecar Travel
Motorcycle fun and weekend rides in China




Jim Bryant
BMW powered CJ750




Scooterbob
Dealer selling CJ750 Sidecars in the USA, also Urals and Dnpers.



EV Shanghai
EV Beijing
Electric Bicycles - custom manufacturing and servicing for delivery.



Beijing's top MMA Gym located at Jianwai Soho