Attention to Details = Reliability!

Check out some of our electrical work. All our Chang Jiang 750 restorations now have the electrical under the gas tank as standard option. The avantage is a much cleaner looking bike, however for adjustments you will have to lift up the tank. Normally it does not require any work in that area.

For solo bikes with non standard headlamps we have the key switches in different locations, either under the seat or in the sidecar mount.

The braided cables we do not use unless the bike is a 6V vintage restoration where the wiring is exposed. For our restorations we use plastic or kevlar type sheathing which will not scratch the bike's paint job.

Sectionalized wiring we no longer use on the bikes, it was a good idea, however exposure to water will cause it to short out.

If you like music and want to party and ride at the same time we can install a sound system for you with a 250watt amp. You can hook it directly up to your ipod. It cost about 400USD to 600USD for the set up.

All our wiring work is professionally done with crimps and proper gauge cables. In many countries if the wiring is not done correctly you will not be able to register the CJ750. We do not use tape to connect the wiring.

Front brake switch - not needed, however some clients request it, I personally think it is ugly. If you have to have it, then get a Barnett cable that has the switch built in. Its more reliable and looks better than having wires on your brake cover.